| s-process | p-process |
Available isotopes for Iodine (Z=53)
Recommended MACS30 (Maxwellian Averaged Cross Section @ 30keV)
135I 
136I
136I
| Total MACS at 30keV: | X | ± | Y* | mb |
Cross sections do not include stellar enhancement factors!
* only theoretical data available
History
| Version | Total MACS [mb] | Partial to gs [mb] | Partial to isomer [mb] |
|---|---|---|---|
| 1.0 | X ± Y* | - | - |
(Version 0.0 corresponds to Bao et al.)
Comment
New dataset. No experimental data available. Recommended value is semi-empirical value.
Last review: August 2014
Last review: August 2014
List of all available values
| original | renorm. | year | type | Comment | Ref |
6.998 | 2014 | e | JEFF-3.2 | jeff32 | |
7.04 | 2011 | e | ENDF/B-VII.1 | endfb71 | |
15.31 | 2011 | e | JENDL-4.0 | jendl40 | |
1.17 | 2005 | e | JEFF-3.1 | jeff31 | |
0.521 | 2005 | t | MOST 2005 | Gor05 | |
0.338 | 2002 | t | MOST 2002 | Gor02 | |
0.218 | 2000 | t | NON-SMOKER | RaT99 |
Original:MACS [<σ v>/vT] (mb) for kT=30 keV, based on the published cross sections except where indicated otherwise.
Renorm:MACS [<σ v>/vT] (mb) for kT=30 keV for which the reference or standard cross section was meanwhile improved.
Type: The letters and numbers in the column labelled 'type' give information on how the cross section has been obtained:
| e | Evaluated value taken directly from the reference |
| t | Theoretical value |
MACS, SEF and Reaction Rates for different energies
| Energy | 5keV | 8keV | 10keV | 15keV | 20keV | 25keV | 30keV | 40keV | 50keV | 60keV | 80keV | 100keV |
| MACS | - | |||||||||||
| Xfactor | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 |
| SEF | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 |
| Rate | - | - | - | - | - | - | - | - | - | - | - | - |
MACS:
Reference: endfb71,jendl40
Procedure: 'e+t' (The MACS from kT=5 keV to 100 keV are derived from calculated cross sections, which are then normalized to experimental data, e.g. to the values at kT=25 keV obtained in activation measurements. In these cases the uncertainties should be linearly increased below 25 and above 30 keV to reach about 30% at the extreme kT values.)
Year: 2014
X-factor:
Reference:
Year:
SEF (Stellar enhancement factor):
Reference:
Year:
Comment:
Rate:
Reaction rate NA<σv> given in 100 cm3/mole/s, including SEF
Chart of nuclei
 | |||||||||||||||||||||||||||
 |
|  | |||||||||||||||||||||||||
 |
Isotope: Iodine